Canon iP2770 printer is an economical printer is the latest from Canon vendor. Like his brothers before, Canon iP2770 printer is also not immune from error problems lately started to emerge and much discussed, especially in cyberspace.

One of the problems iP2770 printer is out error 5200 when will start the print process. And if you calculate the amount blinkingnya 8x orange 1x green. How do I fix this?

Indications iP2770 error 5200:

At the iP2770 printer is turned on, this printer will do its initialization is marked with flashing green LED lights up green LED is full. This seems normal iP2770 printer with its LED light is green. But at the time of the test print or print the document, the printer suddenly stops and error 5200 appears on the screen we are. And the printer will have a blinking green orange 1x 8x.

Cause iP2770 error 5200:

This printer cartridge for black type PG810 and CL811 cartridges for color. Apparently the two cartridge has a pressure sensor temperature. And if the pressure sensor detects the temperature of one of the cartridge was no problem, then the iP2770 printer will display an error message 5200. on the screen. And it is often problematic is the color cartridge CL811.

How to Solve Error 5200 Canon iP2770:

First way:

This method is the easiest way but a lot of money that is by replacing the iP2770 color cartridge error 5200, then the problem was resolved.

Second way:

     IP2770 printer is turned off with the power cord attached.
     Press the RESUME button and hold 2 seconds, then press the POWER button until the green LED flash.
     Then release the RESUME button, but do not release the button POWER.
     POWER button while still depressed, press the Resume button 5 times. Led will flash alternately orange green with orange flames last.

IMPORTANT: do not be mistaken simply press RESUME 4 times, because the printer will die completely, but it is temporary. If this happens, disconnect the USB cable and power cable. Let stand for 2-4 hours, then try your printer.

1. Release both buttons simultaneously.
2. LED flashes green briefly and then going full flame.
3. And the computer will detect new hardware, ignore it.
4. Press the POWER button, the printer will die.
5. Press the POWER button again it will flame and iP2770 printer that had the error 5200 is ready for use again.

Ok,  iP2770 how to resolve error 5200 which we describe, is temporary until the power is unplugged. So if deprived of the power will iP2770 5200 error again. And how to overcome that is repeat the steps above.

Good luck!

» Read More...